Application

  • Inside Duct, Pulled or Blown

Typical Cross section of 2-12 Fibre

Cable Construction Details

  • Up to 12 low water peak single mode fibers in compliance with ITU-T-G.652D
  • Metallic / Non-metallic rod used as a strength member embedded in sheath
  • Loose buffer tubes jelly filled and centrally placed in the cable
  • UV stabilized PE outer sheath, black.

Technical Characteristics

Fibre & Tube colour coding

Blue
Orange
Green
Brown
Slate
White
Red
Black
Yellow
Violet
Pink
Aqua

*More than 12 fibre we provide black Ring mark above the coloured fibre.

Variants

Mechanical Characteristics

  • Cable can be supplied with single mode (ITU-T-G655, and G657) & Multimode (50µm & 62.5µm)
  • Outer Jacket can be of PVC, LSZH, and HDPE
  • Strength member can be Steel or FRP
  • Temperature Range
  • Laying & Installation
  • Operation
  • (IEC 60794-1-2-F1)
  • -10°C to +50°C
  • -20°C to +60°C

Cable Bending Radius (IEC 60794-1-2-E11A)​

Tensile Force (IEC 60794-1-2-E1)

  • During Installation
  • Installed
  • Repeated Bending (IEC 60794-1-2-E6)
  • 20D, D=Cable Diameter
  • 15D, D=Cable Diameter
  • 30 Cycle, r=20D, 5 Kg, Load, D=Cable Diameter
  • During Installation
  • Installed
  • Torsion Resistance
    (IEC 60794-1-2-E7)
  • Crush Resistance
    (IEC 60794-1-2-E3)
  • Kink Resistance
    (IEC 60794-1-2-E10)
  • Water Penetration
    (IEC 60794-1-2-F5B)
  • 800 N
  • 500 N
  • 10 Cycle (± 360°) 5 Kg weight,
    L=1 Mtr
  • 500 N (100 X 100 mm) for 60 sec
  • -15D, D=Cable Diameter
  • 1 Mtr Water Head,3 Mtr Cable Sample, 24 Hours

Drum Length

  • 3000meters ± 5%