Application

• Inside Duct, Pulled or Blown

Typical Cross section of 2-12 Fibre

Cable Construction Details

• Up to 12 low water peak single mode fibers in compliance with ITU-T-G.652D
• Metallic / Non-metallic rod used as a strength member embedded in sheath
• Loose buffer tubes jelly filled and centrally placed in the cable
• UV stabilized PE outer sheath, black.

Technical Characteristics

Fibre Count	Diameter (mm) (Nominal)	Weight (kg/km)	Tensile Strength Installation	Tensile Strength Installed
Up to 72	10.0	85	1800	1000
96	12.0	115	1800	1000
144	15.0	180	1800	1000

Fibre & Tube colour coding

Blue

Orange

Green

Brown

Slate

White

Red

Black

Yellow

Violet

Pink

Aqua

*More than 12 fibre we provide black Ring mark above the coloured fibre.

Variants

Mechanical Characteristics

• Cable can be supplied with single mode (ITU-T-G655, and G657) & Multimode (50µm & 62.5µm)
• Outer Jacket can be of PVC, LSZH, and HDPE
• Strength member can be Steel or FRP

• Temperature Range
• Laying & Installation
• Operation

• (IEC 60794-1-2-F1)
• -10°C to +50°C
• -20°C to +60°C

Cable Bending Radius (IEC 60794-1-2-E11A)​

Tensile Force (IEC 60794-1-2-E1)

• During Installation
• Installed
• Repeated Bending (IEC 60794-1-2-E6)

• 20D, D=Cable Diameter
• 15D, D=Cable Diameter
• 30 Cycle, r=20D, 5 Kg, Load, D=Cable Diameter

• During Installation
• Installed
• Torsion Resistance
  (IEC 60794-1-2-E7)
• Crush Resistance
  (IEC 60794-1-2-E3)
• Kink Resistance
  (IEC 60794-1-2-E10)
• Water Penetration
  (IEC 60794-1-2-F5B)

• 800 N
• 500 N
• 10 Cycle (± 360°) 5 Kg weight,
  L=1 Mtr
• 500 N (100 X 100 mm) for 60 sec
• -15D, D=Cable Diameter
• 1 Mtr Water Head,3 Mtr Cable Sample, 24 Hours

Drum Length

• 3000meters ± 5%