Application
- Inside Duct, Pulled or Blown
Typical Cross section of 2-12 Fibre
Cable Construction Details
- 288 low water peak single mode fibres in compliance with ITU-T-G.652D
- Metallic / Non metallic element used as central strength member for Tensile Strength
- Loose buffer tubes jelly filled and S-Z stranded
- Cable core filled with jelly & S-Z core wrapped with polyester tape
- UV stabilized PE outer sheath, black.
Technical Characteristics
| Fibre Count |
Diameter (mm) (Nominal) |
Weight (kg/km) |
Tensile Strength Installation |
Tensile Strength Installed |
|---|---|---|---|---|
|
96 |
17.0 |
250 |
3000 |
1500 |
|
288 |
18.5 |
330 |
3000 |
1500 |
Fibre & Tube colour coding
*More than 12 fibre we provide black Ring mark above the coloured fibre.
Variants
Mechanical Characteristics
- Cable can be supplied with single mode (ITU-T-G655, and G657) & Multimode (50µm & 62.5µm)
- Outer Jacket can be of PVC, LSZH, and HDPE
- Strength member can be Steel or FRP
- Temperature Range
- Laying & Installation
- Operation
- (IEC 60794-1-2-F1)
- -10°C to +50°C
- -20°C to +60°C
Cable Bending Radius (IEC 60794-1-2-E11A)
Tensile Force (IEC 60794-1-2-E1)
- During Installation
- Installed
- Repeated Bending (IEC 60794-1-2-E6)
- D=Cable Diameter
- 20D*
- 15D*
- 30 Cycle, r=20D*, 5 Kg, Load
- During Installation
- Installed
-
Torsion Resistance
(IEC 60794-1-2-E7) -
Crush Resistance
(IEC 60794-1-2-E3) -
Kink Resistance
(IEC 60794-1-2-E10) -
Water Penetration
(IEC 60794-1-2-F5B)
- 3000 N
- 1500 N
-
10 Cycle (± 360°) 5 Kg weight,
L=1 Mtr - 1500 N (100 X 100 mm) for 60 sec
- 15D*
- 1 Mtr Water Head, 3 Mtr Cable Sample, 24 Hours
Drum Length
- 3000meters ± 5%
